Model 22114

Shaking-press casting molding machine without turning the mold halves, followed by additional pressing. Designed for the manufacture of upper mold halves, and when using tilters - and lower mold halves in the molding departments of foundries of small-scale and serial production plants.
Our plant's range of shaking and shaking-pressing molding machines includes model 22114. This model is designed for the manufacture of upper mold halves, and when using tilters - also lower mold halves in the molding departments of foundries of small-scale and batch production plants.
Application area
Molding departments of shops of small-scale and serial production plants.
Product design
The main components are: a shaking-press mechanism, a traverse, a rack, pneumatic equipment, a lubrication system, a control panel.
In this case, the press traverse is retracted from the working position. After installing the model flask equipment on the machine table, the filling frame is installed and the flask is filled with a mixture. By pressing the "shaking" lever, the mixture is pre-compacted in the flask, after which the filling frame is removed. After shaking, the molding mixture is poured into the flask. Further technological operations are carried out automatically. The operating mode lever is moved to the “automatic” position. The press traverse rotates into working position. Shaking occurs with simultaneous pressing. After the expiration of the time allotted for this operation, the time relay gives the command to stop shaking with simultaneous pressing.
The press cylinder with the shaking table is lowered. In the lower position of the press piston, a command is given to retrace the crosshead to its original position, activate the vibrators and lift the exhaust mechanism. The pull pins separate the sealed mold half from the model. The half-form is removed, the pins are lowered to their original position.